Bottle dating machine

Posted by / 28-Aug-2016 21:17

Bottle dating machine

Once the likely bottle age or date range is determined, some examples of other places to look for more information is provided.: -It is about 9" (23 cm) in height and 2 3/8th inches (6 cm) in diameter.

-It is made of thick, heavy glass for its size, weighing almost 1 lb.

To return from other accessed hyperlinks, use the back arrow on your browser.

If a user needs to refresh themselves on the terminology used to describe the various parts of the bottle, click on Bottle Morphology to view a pop-up page of physical bottle feature definitions.

There are also no horizontal tooling marks present on the finish and/or upper neck as would be observable on the finish of mouth-blown bottles.2.

The side mold seams on most machine-made bottles tend to be finer (narrower and lower) - though sometimes sharper and/or visually distinct than mouth-blown bottle mold seams although many mouth-blown bottles have very thick and distinct seams due to less precise mold construction or fitting.

This bottle dating "key" is a relatively simple "first cut" on the dating of a bottle.

the pontil is actually broken glass where the metal rod used to hold the bottle while the lip was form was broken off leaving a sharp scar.This page and associated sub-pages allows a user to run an American produced utilitarian bottle or a significantly sized bottle fragment through a series of questions based primarily on diagnostic physical, manufacturing related characteristics or features to determine the approximate manufacturing age range of the item.As Berge (1980) noted in referring to bottles, the "..of manufacture of glass containers provides observable attributes which seem to be very useful in a classification of these artifacts." Thus, this page.(Note: the term "parison mold" and "blank mold" are synonymous for the first mold in the two mold machine process.): (see the Note box below point #3 for an exception) run up to the highest point of the finish and often onto the extreme top finish surface (i.e., onto the rim or lip).On many early (very early 1900s into the 1920s) and occasional later (1930s and later) machine-made bottles the vertical body/neck and finish mold seams are discontinuous and offset from each other; click offset seams for a picture of this attribute.

bottle dating machine-62bottle dating machine-14bottle dating machine-18

General Machine-made Diagnostic Features: Machine-made bottles will exhibit most or all of the diagnostic characteristics explained and illustrated below.

One thought on “bottle dating machine”